マキタ(Makita) 18V Cordless Impact Driver TD173D 本体のみ(Bare-Tools/Tool Body Only) " ラップグレード(WrapGrade-Decorative Film) Film-coated Product"

マキタ(Makita) 18V Cordless Impact Driver TD173D 本体のみ(Bare-Tools/Tool Body Only) What is a " ラップグレード(WrapGrade-Decorative Film) Film-Applied Product ラップグレード(WrapGrade-Decorative Film) "?

ラップグレード(WrapGrade-Decorative Film)

★ A highly durable decorative film, based on 3M Wrap Film 1080, intended for wrapping vehicles and similar applications.
★ It is a wrapping/skin seal for customization.
★ A film that can significantly change the appearance of your impact driver just by applying it, without the need for painting.
★ Personalize with your favorite color, helping to prevent mix-ups and theft.
★ Improves visibility, preventing loss and accidents on site.
★ Protects from minor scratches and dirt. Restores to original condition when peeled off.
★ We sell products with the film applied by our store.


Below are the features of the 18V Cordless Impact Driver TD173D 本体のみ(Bare-Tools/Tool Body Only)

●First in Japan: 360-degree ring-emitting LED light
●Eliminates shadows from sockets and bits
●Can also be used as a work light
●Can be used as a simple light source in 'Light Mode'. Illumination time is approximately 1 hour.
●Overall length 111mm, weight 1.5kg (with battery)
●Despite its compact and lightweight body, it delivers high power with a maximum tightening torque of 180N·m
●New Trigger Switch
●Intuitive trigger speed control is possible from low to high speed ranges
●Grip close to the axis
●The hand holding it is close to the head, making it easy to push the axis. Reduces cam-out.
●Optimized center of gravity enables balanced tightening in all directions
●Easy-to-view and easy-to-use control panel with 'rear' placement
●Mode operation and remaining battery capacity can be checked while holding the grip
●Bit wobble 'industry's smallest', adopts double ball bearings
●Tilt angle approx. 10.5°
●With a slim head without protrusions, improved corner driving performance in all directions

★1. Wood Mode
Starts tightening slowly with the trigger fully open, then automatically shifts to fastest tightening.
★2. Bolt Mode
Forward rotation/Instantaneously fastest with trigger ON.
Reverse rotation/Automatically stops when the nut loosens. (Reverse Auto-Stop)
★3. Thin Plate Self-Drilling Screw Mode
After screw penetration, automatically stops upon impact detection.
★4. Thick Plate Self-Drilling Screw Mode
Reduces screw head stripping and cam-out.
★5. On-hand Button
Even while holding the grip, impact mode can be switched.
★6. Mode Memory Function
By pressing two buttons simultaneously, one frequently used mode can be registered. Use the on-hand button to switch between 'the mode used just before' and 'the registered mode'.
★7. Dustproof and Waterproof Plastic Case(excluding small item storage compartment)
★8. IP65 Pro Case capable of storing a total of 4 batteries

Tightening Capacity (mm)
Machine Screws 　　　　M4-M8
Standard Bolts M5-M16
High-Strength Bolts M5-M14
Coarse Thread Screws レッド(Red) 22-125

Max Tightening Torque (N·m)
180

No-load Speed (min-1)[回転/分(Revolutions per minute-rpm) ]
Fastest 0-3,600
High 0-3,200
Medium 0-2,100
Low 0-1,100

Easy Mode No-load Speed (min-1)[ 回転/分(Revolutions per minute-rpm) ]
Wood 0-1,800
Bolt 0-3,600
Thin Self-Drilling Screws 0-2,900
Thick Self-Drilling Screws 0-3,600

Impact Rate (min-1)[ipm]
Fastest 0-3,800
High 0-3,600
Medium 0-2,600
Low 0-1,100

Easy Mode Impact Rate (min-1)[ipm]
Wood 0-3,800
Bolt 0-3,800
Thin Self-Drilling Screws Stops immediately after impact starts
Thick Self-Drilling Screws 0-2,600

Tool Dimensions (mm)
Length 111
Width 81
Height 234

Weight (kg)1.5

Features
High-Power Brushless Motor
Operating Modes: Easy 4 Modes
Power Selection: 4 Levels
Zero Wobble
One-Touch Bit Installation
On-Hand Impact Mode Switching
Dustproof/Waterproof APT
LED Light: 360-degree Ring (with Light Mode)

→Instruction Manual PDF

●About Domestic Shipping Costs
Please check the shipping costs by adding the product to your cart. We have various shipping settings, so please confirm each time. Many products also offer free shipping.
●About International Shipping Costs
Shipping costs are calculated based on weight and volume. Please understand that some products may not be eligible for international shipping.
●About Customs Duties and Taxes
When shipping from Japan to overseas, the ordered products may be subject to customs duties and taxes upon arrival in the destination country, but this may not always be the case. You will receive direct communication regarding this payment from customs or the shipping company we contract with, either DHL or FedEx. Please understand that we entrust the handling of these expenses to the contracted shipping companies. Additionally, these expenses must be paid directly by you to the courier service contracted by us upon delivery, so please be aware of this. Lastly, unfortunately, the exact amount of these expenses cannot be determined until they pass through the customs of each country. We recommend that you inquire with your local customs office or government website for advice regarding these expenses before placing your order.
●Returns After International Shipping
Please contact us within 30 days of receiving the product. Returns will only be accepted if the product is in its original condition. Unopened and unused products can be returned. Return shipping costs will be borne by the buyer. Additionally, while some products may be marked as free shipping, please understand that the sale price may include air freight, fuel surcharges, demand surcharges, and other costs.
●Returns Due to Initial Defects or Issues After International Shipping
We will respond with a full refund. Return shipping costs will be borne by the seller.
●Regarding Other Issues After International Shipping
If the customer is unable to receive the product due to long-term absence, refusal of delivery, incorrect address, etc., and the storage period of the shipping company has expired or the product has been returned, we may ask you to bear all expenses such as air freight costs. Please be aware of this in advance before making a purchase.