The photo shows the tool with a battery fitted. The item supplied is the body only.
※ Only one unit is supplied. Body Only (battery, charger and case are not included). Delivered in the manufacturer's genuine box.
MAKITA
[MUR012G]
Cordless Brush Cutter Body Only
Made in Japan
The MUR012G is Makita's 80Vmax Cordless Brush Cutter (Body Only).
●World's most powerful ※ cordless brush cutter: 80Vmax (2 × 40Vmax batteries) specification. Overwhelming high power equivalent to a 40 mL class engine model (in high-speed mode), allowing work over a wide area. ※ In terms of Max. output among cordless brush cutters. As of June 2021, according to our research.
●Strong in continuous work: the Brushless motor and controller are force-cooled. The controller is efficiently cooled by a heat sink. Suitable for heavy-load work.
●Items sold separately for the MUR012G
●Shredder blade can be used (sold separately): for trimming dense, tangled thickets, bamboo grass, vines and the like. Powerful shredding with two curved blades.
●Chisel blade can be used (sold separately): for cutting shrubs, thin trees and similar. Optimum Asari tooth shape for light, easy cutting. ※ Do not cut trees exceeding 70mm in diameter.
※ Asari: the saw set - the tooth tips are bent alternately left and right so the kerf is slightly wider than the blade. This stops the wood from pinching the blade and clears sawdust smoothly. Flush-cut and dowel saws have no Asari so they do not scratch the surface next to the cut.
●Optimum weight balance: the motor is laid out at the rear. The front end is light, giving an optimum weight balance equivalent to an engine model. Light and easy operability.
●"Both-shoulder type" shoulder harness included: the weight of the machine is taken by both shoulders, reducing fatigue during work.
●Work area per charge "guideline": actual work area approx. 400 tsubo (1,320 m 2 ). "With 2 × BL4040 batteries, Rakuraku Long Drive mode and DC White TCT saw blade / grass height approx. 30cm"
●Lower annual running costs than an engine model ※: ※ Comparison of gasoline costs for our engine model with electricity costs when using a BL4040 battery. Reference values assuming 200 hours of use per year, gasoline at ¥160/ and electricity at ¥26/kWh. Values vary depending on working conditions.
●Can be operated even in the rain ※: achieved by a waterproof design that allows operation in the rain, with the splash- and dust-protective "Wet Guard" and waterproof protection rating "IPX4". ※ This product (excluding the charger) is specified to withstand use in the rain and similar conditions (to our own standard), but this is not a guarantee that it will not fail due to water or dust. When a battery is fitted, the protection rating of the body applies.
| Part No. |
Voltage |
Weight |
JAN |
Price |
| MUR012GZ |
80Vmax |
With 2 × BL4040: 7.9
With 2 × BL4050F: 8.5kg |
0088381750370 |
¥78,400 |
| Item |
Specification |
| Handle shape |
U-handle (asymmetric) |
| Cutting blade φ (mm) |
255 |
| Cutting method |
DC White TCT saw blade |
| No-load speed (min-1) [rpm] |
High: 0-6,400 / Medium: 0-5,000 / Low: 0-3,500 / Rakuraku mode (automatic speed change): 3,500-6,400 |
| Power source (V) |
DC 72 / (80Vmax) ※ 80Vmax indicates the battery voltage at full charge. |
| Continuous operating time per charge (metal blade / no load / guideline) High |
5.0Ah: approx. 1 hour 20 minutes / 4.0Ah: approx. 1 hour 5 minutes |
| Continuous operating time per charge (metal blade / no load / guideline) Medium |
5.0Ah: approx. 2 hours 10 minutes / 4.0Ah: approx. 1 hour 40 minutes |
| Continuous operating time per charge (metal blade / no load / guideline) Low |
5.0Ah: approx. 4 hours / 4.0Ah: approx. 3 hours 10 minutes ※ When using the DC White TCT saw blade. Figures are reference values. They vary with the battery charge condition and working conditions. ※ Including the TCT saw blade (cutting blade) and protective guard. |
| Weight |
With 2 × BL4040: 7.9 / With 2 × BL4050F: 8.5kg |
| Standard accessories |
TCT saw blade (cutting blade), protective guard, blade (cutting blade) cover, shoulder harness, box driver 13-16, hex key 4 and 5, accessory bag |
| High-power Brushless motor |
Yes |
| Dust and water protection |
WG / IPX4 / (battery IP56) |
| Engine equivalent class |
40 mL |
| AFT |
Yes |
| Machine dimensions |
Length 1,854 × Width 585 × Height 495mm |
| Recommended batteries |
BL4040, BL4040F, BL4050F, BL4080F, BL4080H (usable: BL4025) |
| Country of origin |
Japan |
※ The weight is the manufacturer's published value with a battery fitted (packaging and accessories not included). Battery and charger are sold separately.
MAKITA official:MUR012G product page
MUR012G instruction manual (PDF)
※ The instruction manual is in Japanese. If you load the PDF into an AI translator (ChatGPT, Claude, Google Translate, etc.), you can easily read it in your own language.