[HP486D] Makita 18V Cordless Hammer Driver Drill Body Only

The photo shows the tool with a battery fitted. Only the body is supplied.

※ Only one unit will be delivered. Body Only (battery, charger and case are not included). Delivered in the manufacturer's genuine box.

MAKITA
[HP486D]
Cordless Hammer Driver Drill, Body Only

The HP486D is a Makita 18V Cordless Hammer Driver Drill equipped with a high-power brushless motor delivering a maximum torque of 140 N·m. Battery and charger are sold separately.
●Fitted with a high-power brushless motor for high output, high durability and maintenance-free operation. Maximum torque is 140 N·m (hard joint tightening torque).
●Designed to resist heat build-up, with approximately 1.6 times more continuous heavy-duty work capacity (compared with our previous model).
●The internal structure of the gear assembly has been revised for a short body that is 25mm shorter in overall length (compared with our previous model). It can be handled comfortably even in confined spaces. The side grip has also been made shorter for easier use.
●Maximum drilling capacities are 16mm in concrete block, 13mm in steel, 50mm in wood and 76mm for counterboring. Driving capacities are wood screws of φ10×90mm and machine screws of M6. Chuck capacity is 1.5-13mm.
●No-load speed is 0-2,100min-1 at high speed / 0-550min-1 at low speed, and the blows per minute are 0-31,500min-1 at high speed / 0-8,250min-1 at low speed. The clutch has 21 settings plus direct drive.
●As a guide, one battery charge gives approximately 280 holes with a φ8mm carbide drill bit (brick, 30mm depth) and approximately 630 holes with a φ21mm wood auger bit (30mm thick lauan). (These figures are for reference only and vary with the battery charge condition and working conditions.)
●Drip-proof and dust-proof "APT" (this does not guarantee that the tool will not fail due to water or dust). Fitted with LED lights (twin lights, illuminating before rotation and with an afterglow function). Features high/low 2-speed selection, variable speed and forward/reverse rotation.
●Tool dimensions are 180mm long × 81mm wide × 265mm high, Weight 2.3kg (including battery). Standard accessories are a Phillips bit 2-65, stopper pole, side grip and hook.
●The 18V battery (sold separately) can be shared with more than 350 models, including Impact Drivers, various Vacuum Cleaners, Dust Extractors, high-pressure washers, brush cutters, chainsaws and lights.

※ The Weight is the manufacturer's published figure with the battery fitted (packaging and accessories not included). Battery and charger are sold separately.

MAKITA official：HP486D product page
HP486D instruction manual (PDF)

●Shipping cost
Shipping cost for your destination is shown in the cart.

●Duties & taxes
US & EU: duties and VAT are prepaid at checkout (DDP), nothing to pay on delivery.
Other countries: duties and taxes are paid on delivery (DDU).

●Why our terms change
Customs rules keep changing: the US abolished its duty-free threshold (August 2025) and the EU changed its customs rules (July and November 2026). We adjust our carriers and DDP/DDU terms provisionally. If the terms differ from a previous order, this is why.

→ See our full Shipping Policy