Matsumoto Machinery (MAC) Tungsten Electrode Rod Grinding Machine Tantogi TA-60XW Diamond Disc
■Matsumoto Machinery's "Tantogi TA-60XW" is a 2-in-1 multifunctional machine that can perform both "grinding (tip angle)" and "cutting (fixed length)" of tungsten electrode rods with just one unit.
■The main difference from the "Tatetogi (TTA-60C)" is that it includes a "cutting function".
1. Dual function (grinding + cutting)
Not only can it sharpen the tip, but it can also cut the electrode rod to a specified length. It is particularly useful in environments where length management of electrodes is critical, such as in automatic welding machines and robotic welding.
2. High-quality cutting
When cutting with pliers, the electrode is prone to "cracks", but this machine uses a diamond wheel for cutting, resulting in a clean cross-section and stable arcs.
3. Economical and safe
Like the Tatetogi, it is sealed to prevent dust from scattering, making it easier to reuse short electrodes.
“This is a higher model equipped with a cutting function, suitable for more advanced management needs in environments (such as automatic machines and robots).”
■Features
●Economical table slide mechanism!
The table slides, allowing for the use of most surfaces of the diamond disc, making it very economical. Additionally, it is easy to use, allowing for effortless grinding with one hand.
●Can grind down to a minimum of 20mm!
Using the built-in gauge, it can grind down to a minimum length of 20mm without waste. It is also ideal for ultra-small torches.
●Excellent cooling effect for long lifespan!
Adopting a unique cooling method, it successfully dissipates heat from the grinding area. It is less likely to cause burning, and there is no worry about chipping the grinding tip.
●Accurate grinding angles with no misalignment!
You can select grinding angles of 15°, 30°, 45°, 60°, 75°, 90°, 105°, and 120°, and reproduce them accurately. Furthermore, there is almost no influence from misalignment due to bending of the electrode, making it usable for plasma torches.
●User-friendly design focused on workability and safety!
Changing the grinding disc can be done easily without tools.Additionally, the transparent protective cover allows for safe monitoring of the grinding condition.
*When grinding tungsten with a diameter of 3.2mm or more, pre-grinding with a grinder or similar tool can reduce disk wear and shorten grinding time.
*If the tungsten itself has a significant bend, it may cause misalignment.
*The number of grindable pieces decreases if the pressure applied to the table surface is increased.
Tungsten Electrode Diameter
|
φ1.0
|
φ1.6
|
φ2.4
|
φ3.2
|
φ4.0
|
φ4.8
|
Recommended Angle
|
15°
|
30°
|
45°
|
60°
|
75°
|
90°
|
Number of Grindings Possible
|
Approximately 3500 times
|
Approximately 1700 times
|
Approximately 800 times
|
Approximately 450 times
| Approximately 300 times
|
Approximately 200 times
|
| Model |
TA-60XW
|
| Power Supply Voltage |
AC1φ100V 1.3A |
| Rated Frequency |
50Hz/60Hz |
| Rated Speed |
2500/3000r.p.m |
| Rated Output |
60W |
| Usage Rate |
100% (Continuous) |
| Grinding Angle |
15°～ 90° |
| Standard Accessories |
Collet for φ1.6 and φ2.4 (1 each) |
| Standard Accessories |
1 Diamond Disc |
| Body Weight | 4.0kg |
| External Dimensions |
102 (W) × 245 (D) ×195 (H) mm |
| Optional Parts |
Collet φ1.0 φ2.0 φ3.2 φ4.0 φ4.8 |
@North Hills Welding Industry's Youtube Video
https://youtube.com/shorts/sHCi2hno0iI?si=SiM54shurEZi-D_k
