Makita 40Vmax Cordless Impact Driver TD002G Body Only

Makita 40VMax Cordless Impact Driver TD002G 1 unit Body Only
◆TD002GZ Blue
◆TD002GZB Black
◆TD002GZO Olive
◆TD002GZFY Fresh Yellow Limited Color
◆TD002GZAP Authentic Purple Limited Color

●Equipped with DST (Dual Spring Technology)
Fitted with two different springs. Automatically adjusts the impact force according to the work load.
Delivers the fastest tightening in Makita history while also providing outstanding ease of use.
●Reduced cam-out & approx. 10% faster tightening speed
The first, softer spring starts impact quickly. Low recoil & vibration value reduced by approx. 10%.
The second, harder spring then joins in for even more powerful impact. Tightening speed improved by approx. 10%.
●Fastest tightening in Makita history
Maximum impact rate 4,600min-1 (in Max mode). Maximum fastening torque 220N･m.
Powerful tightening of everything from metal fitting screws to coarse thread screws. Work speed improved by approx. 25%.
●Customizable with the dedicated app and adapter (sold separately)
With the dedicated app and the separately sold communication adapter (ADP11), each of the ｜4-stage impact mode｜ and ｜Easy 6 modes｜
settings and the ｜LED light｜ can be customized.


●4-stage impact mode (Max / Hard / Medium / Soft)
Each mode can be individually customized in the app. Covers everything from work where power and speed come first to delicate tightening of machine screws and the like.
●4 LED lights
The brightness and afterglow time of the light can be customized in the app.
●Up to 10 customized settings can be registered
Five initial presets ready to try. No setup required - ready to use right away.
●Protection from dust and rain, dust- and water-resistant protection rating IP56
●Dust- and water-resistant plastic case (excluding the small parts storage compartment)
●4 LED lights
Bright even when driving in corners, and the revised light layout also improves workability.
Set the forward/reverse lever to neutral and pull the trigger to enter ｜Light Mode｜, so it can also be used as a simple work light.

① Wood mode
｜Standard｜
With the trigger fully pulled, tightening starts ｜slowly｜, then shifts automatically to ｜Max｜ to finish the fastening in one go.
Prevents screws from tilting.
｜Customization｜
The soft start speed and the speeds at the start and after impact can be adjusted.

② Self-drilling screw (thin plate mode) ③ Self-drilling screw (thick plate mode)
｜Standard｜
Thin plate mode: Stops automatically on impact detection after the screw penetrates.
Thick plate mode: Reduces screw head breakage and cam-out.
｜Customization｜
The soft start speed and the maximum speed can be adjusted.
In thin plate mode the impact time can be adjusted, and in thick plate mode the maximum speed after impact can be adjusted.

④ Bolt 1 mode ⑤ Bolt 2 mode
｜Standard｜
Bolt 1: In forward rotation it stops as soon as impact begins. In reverse it stops after impact ends.
Bolt 2: In forward rotation it stops 0.3 seconds after impact is detected. In reverse it stops after impact ends.
｜Customization｜
The initial maximum speed and impact time can be adjusted, and for Bolt 2 the loosening amount can also be adjusted.

⑥ Bolt 3 mode
｜Standard｜
In forward rotation it stops 1.0 second after impact is detected. In reverse it runs at a low speed of 180min-1 after impact ends (stops at any desired position).
｜Customization｜
The initial maximum speed, the impact time and the loosening speed after impact ends can be adjusted.

Fastening capacities (mm)
Machine screw M4-M8
Standard bolt M5-M16
High tensile bolt M5-M14
Coarse thread screw 22-125

Maximum fastening torque (N·m) 220

No-load speed (min-1) [rpm]
Max 0-3,700
Hard 0-3,200
Medium 0-2,100
Soft 0-1,100

Easy mode no-load speed (min-1) [rpm]
Wood 0-1,800
Bolt [1] 0-2,700
Bolt [2] 0-3,700
Bolt [3] 0-3,700
Self-drilling screw thin plate 0-2,900
Self-drilling screw thick plate 0-3,700

Impact rate (min-1) [blows/min]
Max 0-4,600
Hard 0-3,600
Medium 0-2,600
Soft 0-1,400

Easy mode impact rate (min-1) [blows/min]
Wood 0-4,600
Bolt [1] Stops immediately after impact starts
Bolt [2] 0-4,600
Bolt [3] 0-4,600
Self-drilling screw thin plate Stops immediately after impact starts
Self-drilling screw thick plate 0-2,600

Tool dimensions (mm)
Length 119
Width 86
Height 247
Weight (kg)　1.6

Features
High-power Brushless motor
Application modes: Easy 6 modes
Power selection: 4 stages
Dual spring
Customizable via app
Zero-wobble start
One-touch bit installation
Impact mode switching at hand
Dust/water resistance: APT IP56 (battery IP56)
LED light: 4 lamps (with light mode)

Recommended batteries
BL4020 ◎
BL4025 ◎
BL4040 ◎
BL4040F ◎
BL4050F ○
BL4080F ○

→　Instruction Manual PDF

●Shipping cost
Shipping cost for your destination is shown in the cart.

●Duties & taxes
US & EU: duties and VAT are prepaid at checkout (DDP), nothing to pay on delivery.
Other countries: duties and taxes are paid on delivery (DDU).

●Why our terms change
Customs rules keep changing: the US abolished its duty-free threshold (August 2025) and the EU changed its customs rules (July and November 2026). We adjust our carriers and DDP/DDU terms provisionally. If the terms differ from a previous order, this is why.

→ See our full Shipping Policy